Power tools: the basics
Get the right tool for the job with Duncan Hayes' essential guide
Fit for
purpose
The first
question you need to ask about a tool is: is it fit for purpose? Every site
needs good, all-purpose tools, but if you’re investing for a specific job
you’ve got to think it through. There’s no point buying the biggest drill possible if you’re going to be working on ceilings, as the weight will just tire you out, while a drill that’s not tough enough for the job in
hand is just a waste of time.
Most
injuries to do with power tools are down to people using them inappropriately
for jobs they weren’t designed for, so, regardless of whether you’re hiring or
buying, make sure you have the right tool for the job, that you know how to use
it properly and wear the right protective equipment.
Power
source
Consider
the practicalities of power on site, as there are numerous power sources for
tools, including gas-powered, petrol-driven, air tools for use with
compressors, corded or battery operated. For most site use, the majority of
self-builders will stick with a combination of corded and battery operated
tools, with the power offered by corded being offset with the versatility of
battery.
A useful
rule of thumb is that the more power a tool has, the heavier it will be.
Traditionally, the more powerful tools were corded, but developments in batteries continues
apace, and these days many leading manufacturers offer battery-powered versions
that give their corded versions a good run for the money. Battery powered are
especially useful for sites without electricity and several demands on the
generators, but you will need to make provision for charging spare batteries.
Batteries
Nickel
Cadmium (NiCad) The original battery choice, NiCad batteries lose their charge
if not used, and compared to the modern contenders are large and heavy. At the
moment they’re still relatively cheap to produce, can be recharged many times
over, and perform in extreme temperatures.
Nickel
Metal Hydride (NiMH) Lighter than NiCad, NiMH have 2-3 times the capacity of
the equivalent NiCad battery giving them a longer running power, but they are extremely temperature sensitive.
They also have a much shorter recharge life than NiCad, although the fact that
they run for longer balances this out.
Lithium Ion
(Li-Ion) Much smaller than the other batteries, compact and lightweight, Li-Ion
are more powerful and hold their charge for longer than other batteries, with
no battery memory and no self-discharge. Electronic Cell Protection (ECP) also
offers longer service life.
DIY or
professional ranges?
Professional
tools are tougher, higher spec tools that will have a longer life as they are
designed for continuous use, rather than the ‘light occasional’ that is the focus of the DIY tool
market. Many companies offer both ranges, such as Bosch. What you need the tool for and how much you will be using it are good indicators of when it’s worth paying the premium for a
tool that will be a workhorse.
No name
vs branded
You may
think you can save money by steering clear of the major brands in favour of
cheaper alternatives, but for site work this is rarely a long-term saving.
Major brands, such as Bosch, spend a lot of money each year honing and
developing their tools to make them tougher, more efficient and finely
balanced.
A no-name
brand tool, such as a drill-driver, may look like the branded version, but
chances are the branded tool will be more refined with more user options –
offering better and more comfortable use and longer life, as well as featuring
higher-quality materials in its composition. Motors, in particular, are prone
to fail in cheap tools.
What’s more
a high-quality tool will offer better efficiency, with more of the power being
disbursed to the output, rather than being lost on the way through poor design.
Simply put, good quality tools are safer and more efficient to use, and will
save you time
and discomfort while using them. They’ll last longer, too.
Hire or
buy?
With some
professional tools, you’ll only need them once in the average life of a site,
but having a tool that’s custom designed for a job can save time and a whole
lot of effort. In which case it pays to work out how much the tool costs, plus
any resale value, and how much time it will save you. Chances are that when you
compare this to the hire cost for the time you expect the job to last then
you’ll be better off hiring the tool – and at least that way you don’t have to
worry about it failing and leaving you with a problem. A drywall screwdriver
may not warrant you buying the tool, but it will save you time and money if
you’re doing this work yourself.
There are
many specialist power tools, such as metal saws and a range of carpentry tools,
like biscuit jointers and routers, that just aren’t that relevant to a
self-build, and these should normally be hired if required – unless you plan to
use them after the build is completed, or you’re a fan of woodworking.
When it
comes to voltage on site, Eric Streuli, training manager for Bosch Power Tools
explains why the UK is different from Europe: “Construction sites in the UK use
110V power tools, so most professional power tools operate at this voltage,
while consumer models run at 230V. The 110V system reduces the ‘live’ potential
of the conductors in the cable to a harmless 55V.
“Some
companies actually specify the use of only 110V tools as mandatory in their
conditions of employment, but in the majority of the EU 230V tools are used on
site without problems. The use of 110V tools is not enforceable under Health
and Safety law, so 230V versions can be legally used for your build. If you
choose to do this, fit a Residual Current Device (RCD) at the source of the
230V supply. This will offer protection against electric shocks – be sure to
test it daily.”
< more articles like this